2000 Litre Underdeck Water Tank

Standard Fittings:

Inlet

1 x 300mm Inlet with leaf Strainer in the centre at one end of the tank.

Outlet

2 x 25mm sealed brass outlets – once on each end of the tank 43mm from base.

Overflow

Overflow is sealed – installer to drill the overflow with a holesaw

Delivery

Delivery is to accessible front of site only.  Drivers will not move tanks on your property due to OH&S.

To confirm delivery is possible, It is helpful for you to advise if the street/site is steep, narrow or is a cul-de-sac etc as our truck and trailer can be up to 20 metres long. Or if there are any other issues that may effect delivery.

Site Preparation and Installation

1.    Ensure that the area chosen is stable original ground and not filling soil.

2.    All tanks must be on a level base of concrete 100mm thick with a minimum strength 25m.p.a. and one layer of F72 reinforcement.

3.    Concrete must extend a minimum of 30mm outside of the tank perimeter of the tank.

4.    Crusher dust may be used but must be a minimum of 75 mm thick, compacted and the outside edge must extend a minimum of 30mm outside of the tank’s perimeter with edges concreted so the tank cannot be undermined.

5.    All tanks come complete with a ball valve, stainless steel mesh strainer and a tank overflow fitting.

6.    We recommend a professional tank installer or plumber should install your tank.

7.    Polyethylene tanks will expand when filled. Allowance for expansion is required when plumbing work is carried out.

8.    Clean leaves & debris from strainer on a regular basis.

NB.  We do not accept returns for wrong size.  Please ensure you measure carefully

Please see Installation Instructions  Enviro-Tank-Pad-Preparation

Get Tanked Water Tanks are happy to chat with you about your water storage needs. If you would like more information please do not hesitate to contact us Contact Us