WARRANTY

Yarra Plastics are so confident in the quality of our product that should a defect due to either FAULTY MATERIAL or WORKMANSHIP become apparent within 10 years from the date of original purchase of the product, such defect will be rectified without cost to you for replacement or shipping.

TERMS OF WARRANTY

We Warrant that our product will be free from inherent defects and workmanship for the term of 10 years, limited to repair or replacement ( at our sole discretion ) for the tank only,

When making a claim on this warranty the original invoice or other similar proof of purchase will need to be provided by the purchaser,

Yarra Plastics will not be liable for any personal injury, consequential losses including loss of profits or damage to property,

The liability under this Warranty by the Manufacturer (Yarra Plastics) is excluded to the extent that any defect has been caused or contributed to by;

• Improper tank installation, incorrect base preparation, base deterioration, and undermining of base of tank.
• If the product is damaged by inclement weather, undue force, misuse or accident
• Damage is sustained by vermin, pests or pets
• Repositioning of the tank from its original location.
• The ID label is removed or tampered with,
• Any modification to the tank.
• The tank is used for any other purpose than that of storing static water in the tank.
• If the product is damaged by not using a flexible connection between tank and pump.

The warranty does not apply to the colour which may fade or change over time,

A one (1) year warranty only applies to the inlet strainer, overflow, brass outlet and gate valve,

This warranty does not apply to any defects specifically bought to the attention of the customer prior to purchase.

TANK INSTALLATION INSTRUCTIONS

1. Your new tank is to be situated on a solid level, flat base which is well compacted and free of any sharp objects, rocks or stones.
2. A concrete base is preferred but a 75mm compacted sand or crusher dust base is acceptable.
3. The prepared area must be at least 300mm larger than the tanks base, so that the sand cannot erode from under the tank.
4. The overflow from the tank must be plumbed so that it discharges 300mm away from the base of the tank.